Page 56 - Bridgepoint Systems 2017-2018 Catalog
P. 56

CONCRETE, TILE AND GROUT


          Cleaning Procedures





        CONCRETE FLOORS AND SURFACES                           Sealing Procedures for Stone, Concrete, Tile & Grout

        Deep Cleaning and Degreasing Procedures                GENERAL CONSIDERATIONS
          1. Mix Viper Peroxiblast according to directions.     •  All stone, grout and porous tile should be sealed using an impregnating
           Dilution should be adjusted to the degree of soiling.   sealer to protect the surfaces while preserving the natural appearance.
           Apply mixed solution with sprayer evenly and liberally   •  Sweep or vacuum floor to remove particulate soils.
           across surface to be cleaned. If preferred, you can   •  Protect surfaces not being sealed.
           apply mixed solution with a damp mop, sponge, or
           other appropriate professional equipment. If using   APPLICATION PROCEDURES
           a mop for solution application and surface cleaning,   1. For stone floors or porous tiles, apply an even coat of
           change your mop water often to make sure that soil is   Viper Premium Stone & Grout Sealer using a slightly
           not redeposited.                                       damp rayon mop, a roller or sprayer.
          2. Allow 5 -10 minutes of dwell time. For concrete, if there are stains have been   2. For porcelain, glazed ceramic or other non-porous tiles,
           deeply absorbed, allow 15 minutes of  dwell time so the solution has time to   apply Viper Premium Stone & Grout Sealer to the
           reach into the concrete pores and crevices and the oxygen activated effer-  grout lines only. There are a variety of tools to help you
           vescent solution can dissolve the soiling and lighten discoloration through   in this task. Any sealer that gets on the tile should be
           bleaching action.                                      wiped off before it dries.
          3. For best results, agitate and extract cleaning solution using warm or hot   3. For concrete floors and surfaces, apply Viper Grout &
           water and a rotary agitation surface cleaner such as a Hydro-Force SX-15 or   Concrete Sealer.
           SX-7. For tight spaces or especially sensitive surfaces, use the Hydro-Force   4. For large areas of tile, spread the sealer using a clean
           Gekko Hard Surface Extraction Tool, or simply agitate with mop and rinse   moss rubber squeegee. This can be followed by a
           with clean warm or hot water.                          rotary floor machine fitted with a white pad. This will
          4. Rinse the area thoroughly with water and allow to dry. Accelerate drying with   remove excess sealer and polish the tile.
           air mover like the OmniPro Mini or OmniPro OmniDry air mover.  5. An optional second coat may be applied to porous
                                                                  stone or concrete after the first coat has dried.
        Cleaning and Brightening Procedures
          1. Mix Viper Peroxibright CTG according to label direc-
           tions. Dilution should be adjusted to the degree of
           soiling. Apply mixed solution with sprayer evenly and
           liberally across surface to be cleaned. If preferred, you
           can apply mixed solution with a damp mop, sponge,
           or other appropriate professional equipment. If using            CONCRETE, TILE AND GROUT
           a mop for solution application and surface cleaning,
           change your mop water often to make sure that soil is
           not redeposited.
          2. For best results, agitate and extract cleaning solution
           using warm or hot water and a rotary agitation surface
           cleaner such as a Hydro-Force SX-15 or SX-7. For tight spaces or especially
           sensitive surfaces, use the Hydro-Force Gekko Hard Surface Extraction
           Tool, or simply agitate with mop and rinse with clean warm or hot water.  CHEMICALS    TOOLS
          3. Rinse the area thoroughly with water and allow to dry. Accelerate drying with   See Pages 51-52  See Page 55-59
           air mover like the Hydro-Force Air King or OmniPro OmniDry Air Mover.





    54
   51   52   53   54   55   56   57   58   59   60   61